Xhun Audio ShineVerb

Reverb Processor

Xhun Audio ShineVerb is a creative tool specially designed for reverberation, spatialization and sound coloration purposes. This multi-device effects processor is composed by a set of modeled analogue gears and digital devices, arranged inside a rack-mount cabinet and accessible through a simple and easy to use interface.

In order to provide an extended degree of expressiveness and versatility for any sound design scenario, in addition to its beautiful resonator-based digital reverberation core, ShineVerb also includes a stereo image enhancer, an analogue preamplifier and a final, hybrid amplifier for further sound colorations.

Be free to design anything from small chambers up to endless, distorted echoes. With just a click of a button and a twist of a knob, ShineVerb will put all its magic and glow into any music production.

More Than Just An Echo

Playing the leading role in ShineVerb is the REEVERB XT device, a digital reverberation unit with an extended set of controls. It also features a special panorama enhancer engine, to finely adjust the stereo image width of the processed sound.

Moreover, to unleash all the potential of its reverberation unit, ShineVerb also includes a set of additional devices in its signal processing chain.

Available at pre-processing stage, the PRE-AF24 unit is an analogue preamplifier featuring an input signal router, an analogue overdrive circuit and a multi-mode (low-pass or high-pass) analogue filter.

On the post-processing side, the MIX-DF42 unit is a hybrid amplifier made of two digital low-pass and high-pass filters, an analogue saturation circuit and a final mixer section.

More than a simple reverberation unit, ShineVerb is a complete, powerful tool with a simple, intuitive interface.

Xhun Audio ShineVerb Features

• Accurate modeling of analogue gears and digital devices, achieved by the adoption of the Advanced Component Simulation (ACS) approach
• Full 64-bit processing accuracy for every single aspect of the simulation
• An all-in-one complete setup : analogue preamplifier + digital reverb unit + hybrid amplifier
• Featuring PRE-AF24 Analogue Multichannel Router / Preamp
  • Multi-mode input signal router with gain control (from -inf dB up to +6 dB)
  • Analogue modeled overdrive circuit with gain control (from +0 dB up to +18 dB)
  • Analogue modeled (topology-preserving transform) multi-mode filter (1-pole low-pass or high-pass)
• Featuring REEVERB XT Advanced Digital Resonator Reverb
  • A beautiful, resonator-based reverb engine with an extended set of controls
  • Pre-delay engine (up to 2 seconds)
  • Panorama enhancer engine, to finely adjust the stereo image width of the processed sound
• Featuring MIX-DF42 Multisource Mixer / Amplifier
  • Multi-mode (bypass / normal / inverted) digital filter block (2-pole low-pass and 2-pole high-pass)
  • Analogue modeled saturation circuit with gain control (from +0 dB up to +15 dB)
  • Final mixer section, with blend (dry / wet) and main volume (from -inf dB up to +6 dB) controls
• Including more than 30, multi-scenario factory presets
• Support for sample rates from 44.1 kHz up to 192 kHz
• Available in multi-size GUI resolutions